FORMWORK ACCESSORIES :

WN 36
Wing Nut, 2 Wings Base Diameter 36mm for Tie Rods DG 15/17, Galvanized. Quality Test Report

 
 


 

WN70
 Wing Nut, 2 Wings Base Diameter 70mm for Tie Rods DG 15/17, Galvanized. Quality Test Report
 
 

WN 100
Wing Nut, 2 Wings Base Diameter 100mm for Tie Rods DG 15/17, Galvanized. Quality Test Report

 
 
 


 

WN120
Wing Nut, 3 Wings Base Diameter 120mm for Tie Rods DG 15/17, Galvanized. Quality Test Report
 
 

UWN120
Universal Wing Nut Movable(app.15*) Base Square 120mm, for Tie Rods DG 15/17. Quality Test Report

 
 
 


 

WS1  Water Barrier (Water Stopper) with center Flenge for Tie Rods DG 15/17, Self Colour or Galvanized.
Quality Test Report
 
 

 WS2    Water Barrier(Water Stopper) with Ribs for Tie Rods DG 15/17, Self Colour or Galavnized Cold Rold Full Thread Tie Rod DG 15/17 Weldable and Bandable

 
 
 

 

Cold Rold Full Thread tie DG 15/17 Weldable and Bandable
TR1  : for Safe Working Load 90 KN and Breaking Load 180 KN
TR2 : for Safe Working Load 80 KN and Breaking Load 160 KN
Quality Test Report
 
 

 Cast Counter Plate(Anchor Plate) 120 *120*8mm.  CCP1
Quality Test Report
  Cast Counter Plate(Anchor Plate) 100*140*8mm    CCP2
 Cast Counter Plate(Anchor Plate) 130*130*8mm   CCP3

 
 
 

 

SCP4 Steel Counter Plate (Anchor Plate) 120*120*6mm  
SCP5 Steel Counter Plate (Anchor Plate) 120*120*7mm  
SCP6 Steel Counter Plate (Anchor Plate) 120*120*8mm 
Quality Test Report 
 SCP7 Steel Counter Plate (Anchor Plate) 120*120*10mm 
 
 

Cast Hex Nut With Base For Tie Rod DG 15/17 Galvanized
CHN1  Hex 30*30mm Long
CHN2  Hex 30*50mm Long 
Quality Test Report

 
 
 

 

CCS3  Cast Connector Sleeve 30 x 105mm with center pin for Tie Rod Dg     15/17, Gavanized     
 
 

Steel Hex Nut Weldable for Tie Rod DG 15/17 Galvanized
SHN1   Hex 30*30mm Long   
SHN2   Hex 30*50mm Long  Quality Test Report
SHN3   Hex 30*70mm Long

 
 
 

 

Steel Hex Connector with center pin weldable for Tie Rod DG 15/17, Galvanized
SHC4 : Hex 30*90mm Long Quality Test Report
SHC5 : Hex 30*105mm Long     
SHC6 : Round 30*105mm Long 
 
 
Formwork Clamp With Alloy Steel Forged And Heat Treated Wedge
FC1 Formwork Clamp 4-10mm Quality Test Report
FC2   Formwork Clamp 7-12mm             

 
 
 

 

TFC1  Tensionar for Formwork Clamp    
 
 
SC1  Spring Clamp 50*110mm Base Cast Body.
SC2 Spring Clamp 75*110mm Base Cast Body
Quality Test Report
 SC3  Spring Clamp 75*110mm Base Sheet Metal Body

 
 
 

 
CC1  Cone Big, For Tie Rod DG 15/17, Galvanized    
CC2  Cone Small For Tie Rod DG 15/17, Galvanized 
  
 
 

Ab1  Anchor Bolt For Tie Rod DG 15/17, Galvanized     

 
 
 

 

AB2  Anchor Base, For Tie Rod DG 15/17, Galvanized

BACK